PRODUCTS


Epoxy Injection System



PILGRIM UWC LV Cartridge is a two-component, high strength, low viscosity, fast set, epoxy resin adhesive, packaged in a side by side 450 ml cartridge.

Provides point-of-use application to save time, material and minimize health hazards. The PILGRIM UWC LV Cartridge provides a unique method of handling, storing and dispensing of two-component materials. Ideal for low to medium volume material users that wish to eliminate problems associated with the use of two-component epoxy adhesive.

Surface Crack Repair



TRANSPO Sealate T-70 is a specially formulated, high molecular weight methacrylate resin system that is highly effective for sealing and filling cracks in concrete structures. It is available in both T-70 and T-70 MX-30 formulations.

Segmental Epoxy Systems



Pilgrim CBC 6 is a moisture insensitive high strength paste adhesive ideally suited for vertical and overhead bonding. Like all Pilgrim liquid epoxy formulations, it is distinguished by 100% solids. No solvents. Insensitive to damp conditions during application and after curing, good water resistivity, low-creep characteristics and tensile strength greater than concrete. In addition CBC 6 functions as a lubricant during the joining of match cast segments. The cured CBC 6 provides intimate contact for stress transfer by filling all interstitial space between the match cast segment faces.

Epoxy Casting Systems



FCC is a specially formulated 100% solids 
two-component inert filled casting resin compound for use under ambient operation conditions below 150°F. FCC is non burning, non shrinking and has high impact and compressive strength. Adhesion to oil free surfaces and to previously cured sections or castings is good. The cast sections may be machined, drilled or edge ground. The components are non toxic and the by-products under extreme heat are non toxic.

Precast Grout System



Magmaflow Grout-Pak is a three-component, 100% solids, modified epoxy system formulated to produce a high strength, moisture-insensitive, chemical resistant epoxy grout. Magmaflow Grout-Pak CF was formulated specifically for FRP strengthening reinforcement for near surface mounted (NSM). As NSM reinforcement the FRP is solid circular rod. The force transfer and composite behavior with the existing member is accomplished using an epoxy adhesive (Magmaflow Grout-Pak CF) to bond the FRP and concrete together. The strengthened member's yield and ultimate bending moment capacity will thus be increased due to the additional tensile force provided by the supplemental FRP reinforcement.


Documentation
Purchase